Fusion3
FUSION3 EDGE 3D PRINTER
FUSION3 EDGE 3D PRINTER
- Regular price
- Price: $8,849.00
- Regular price
- List Price: $10,199.00
- Sale price
- Price: $8,849.00
- Unit price
- / per
Couldn't load pickup availability
Share

Description
3DPrintersmarketplace.com is a proud Authorized Retailer of the Fusion3 Edge 3D Printer
EDGE delivers unparalleled performance with materials such as ABS, PC, ASA, and Nylons thanks to it’s ability to reach the correct temperatures for these materials:
- 315C print head
- 145C bed
- Fully enclosed build chamber with controlled airflow through filter
- Passively heated chamber that maintains a max temp of 70C
Our favorite high-temperature materials include:
- Pure polycarbonate (Tg 140C) (“easy print” variants mixed with other plastics need not apply)
- PC-PBT (Tg 120C)
- ABS (Tg 105C)
- ASA (Tg 100C)
Multiple Nozzle Sizes
Select between our 0.4mm, 0.6mm, and 0.8mm print head nozzles for the right balance of detail vs speed for your application. Nozzles can be changed in as little as 3 minutes, and the same print head can use all 3 nozzle sizes.
Versatile Print Surfaces
EDGE can be equipped with a magnetic tool plate, to enable the use of print surfaces other than glass. This flexibility can be used to print specialized materials or enable higher throughput in production environments.
Secure Variant
We recognize the importance of security in our modern world. If you need 3D printing capability in classified or secure environments, EDGE’s Secure variant delivers. This variant has no radios of any kind (bluetooth, wifi, etc) on board to minimize the attack surface available to hostile actors.
Filament Dryer
For long prints in moisture-sensitive materials, or for locations with poor humidity control, the filament bay dryer can slow down the rate of moisture absorption while rolls of filament are in the filament bay. This can reduce (but not eliminate!) the need to frequently dry the filament and improve your print quality/consistency.
Stack Light for Status-at-a-Glance
Our optional stack light allows you to see the status of your EDGE printer from across the room. Is it running, does it need attention, or is it ready for another print job? For folks who run fleets of printers, this time saving device can be invaluable. The stack light has a magnetic base and extra-long cord for flexibility.
Printer Cart
The companion rolling cart for EDGE offers a convenient home for the printer, containing interior storage and convenient pass-thru holes for the power cord. This becomes a valuable addition if you have limited desk space or anticipate frequently moving the EDGE printer.
Standalone Filament Dryer Oven
All thermoplastics will absorb moisture from the air, and this moisture will negatively impact your print quality. The most reliable way to remove this moisture and control your print quality is to dry the material before use. A standalone filament drying oven is an effective solution to wet filament issues.
PHYSICAL DIMENSIONS & WEIGHT |
|
Dimensions (DxWxH): |
657 x 720 x 640 mm (25.9 x 28.3 x 25.2 in) |
Weight: | 29.5 kg (65 lb) |
PRINT SIZE & VOLUME |
|
Max Print Size (LxWxH): | 368 x 368 x 343 mm (14.5 x 14.5 x 13.5 in) |
Max Build Volume: | 1.64 cubic feet |
PRINTING |
|
Print Technology : | Fused Filament Fabrication (FFF) |
Max Print Speed: | 250 mm/sec |
Max Travel Speed: | 500 mm/sec |
Motion System |
Fusion3’s Patented ‘F-Series’ motion control system, updated with high-performance linear rails on all axes and 2GT belt CoreXY |
Extruder / Feeder Type: | Bowden drive / Geared feeder |
Filament Monitoring: |
Yes, detects if a jam or run out, with dynamic timeout adjustment for printing materials that run at slower speeds |
ENCLOSURE & PRINT SURFACE |
|
Ambient Operating Temperature: | 7oC – 29oC . 45oF to 85oF |
Enclosure Temperature: | 70oC max |
Print Surface: | 1/4″ Alumnium toolplate with glass and mutizone heater, optional 1/4″ magnetic toolplate surface for use with glass and multiple optional print surfaces, including BuildTak, Garolite, Kapton, PEI, and Polypropolyne |
Maximum Bed Temp: | 140oC |
Bed Leveling: | Automatic, cable driven probe type with self-calibrating probe offset |
MATERIALS |
|
Diameter: | 1.75 mm |
Types: | All major printable plastics (See certified materials list) |
Spool Handling: | Adjustable, Spool Roller |
Max Spool Size: | Up to 12” diameter, 6” width, Note: customer must ensure that weight, orientation, and motion of spool does not create drag which will impact performance of extruder. |
PRINT HEADS / PERFORMANCE |
.4MM |
.6MM |
.8MM |
Print Head: | Fusion3 ANVIL | Fusion3 ANVIL | Fusion3 ANVIL |
Layer Height (Min – Max): | 20 – 300 microns | 100 – 400 microns | 200 – 500 microns |
Min Feature Size: | .5 mm2 | .75 mm2 | 1.0 mm2 |
Feature Tolerance: | 0-6″ +/-.005 | 6″+ +/-.010 | 0-6″ +/-.005 | 6″+ +/-.010 | 0-6″ +/-.005 | 6″+ +/-.010 |
Print Nozzle (Tube): |
.4 mm surgical steel, wear resistant, replaceable tube |
.6 mm surgical steel, wear resistant, replaceable tube |
.8 mm surgical steel, wear resistant, replaceable tube |
Maximum Melt Temperature: | 320oC | 320oC | 320oC |
Maximum Cubic Flow Rate: | 20 mm^3/sec | 36 mm^3/sec | 45 mm^3/sec |
SOFTWARE |
|
Processing Software: |
Fusion3 F3Slic3r. |
Operating Systems: | Windows |
File Types: | .STL, .OBJ, .STEP |
ONBOARD CONTROLLER, STORAGE & NETWORKING |
|
Screen: | 7″ full color touchscreen |
Print Controller: | 32-bit, 120mhz ARM-Based controller |
Interface Controller: | 64-bit, 1.4GHz ARM-Based controller |
Storage: |
Standard Version: Onboard 32GB flash storage, external USB port Secure Version: Onboard 32GB flash storage, locked external USB port |
Remote Management: | Intuitive user interface accessed via web browser over local network, giving full access to all functionality, password secured. |
Network Connections: |
Standard Version: 2.4Ghz, 5Ghz WiFi, Bluetooth 4.2, Gigbit Ethernet Secure Version: Gigabit Ethernet Only |
ELECTRICAL & CERTIFICATIONS |
|
AC Input: | 110V / 230V , 350W avg |
Peak Power: | 6A / 3A, 600W |
Certifications |
CE & FCC Certified, Power Supply UL Certified. |
WARRANTY & SUPPORT |
|
Standard Warranty: | 2 Years, materials & workmanship (including printhead) |
Technical Support: | FREE for life of 3D printer |
AVAILABLE OPTIONS |
|
EDGE Heavy-Duty Rolling Cart: | $800 |
ANVIL Print Head: |
$125 |
Set of ANVIL Replacement Print Tubes (.4MM, .6MM or .8MM) | $50 |
Set, 3 Glass Print Beds: | $50 |
Replacement Filter Set: | $49 |
EDGE Stack Light (visual status) |
$90 |
Filament Bay Dehumidifier |
$120 |
Magnetic Print Bed (print with glass and optional magnetic surfaces) |
$300 |
Reusable Sheet Steel Print Surface (for Magnetic Print Bed) |
$34.99 |
Various Print Surfaces (requires Reusable Sheet Steel Print Surface) |
Varies depending on surface |
Binder EDS 115 Lab Oven (for Humidity Free Filament Storage) |
Must purchase directly through Binder – https://www.binder-world.com/us-en/product/ed-115 |
Additional REACTOR Software License | $150 |
1500VA UPS Basic Backup – Power Conditioning & 7-15 minutes of power |
$449 |
1000VA UPS Smart Backup Controller – Power Conditioning, 7-15 minutes of power, control multiple daisy chain batteries |
$699 |
Daisy Chainable Battery (each) – provides up to 50 minutes run time (requires Smart Backup Controller) |
$699 |
PRICE & SHIPPING |
|
EDGE 3D Printer: | $8,849 |
Shipping (USA & Can): | via LTL Freight |
International Shipping: | via Air Freight |
Shipping Cost: | Free Shipping to most US locations – price varies for international. Please contact for quote and bundle packaging. |







